Product Description
Balboa 58083 M7™ FloThru Heater
15" x 2", 230v, 5.5kW, w/Sen, Studs, Tail Pieces
FREE SHIPPING
Features:
- Balboa OEM VS Heater Assembly with M7 Sensors, G7510
- Stainless Steel Heater Housing
- 5.5KW Incoloy Flo-Thru Heater Element
- Balboa M7 Dual Sensors
- Pair of 2.0 inch Heater Split Nuts
- Pair of 2.0 inch Heater Tailpieces
- Pair of 2.0 inch O-Ring Gaskets
| Housing Configuration | Straight |
| Heater Length | 15" |
| Lead End Terminal Location | 4-1/4" |
| Threaded Tap Orientation | None |
| Threaded Tap Location | 13" From Leading End, 2" From Leading End |
| Kilowatts | 1.375kW, 5.5kW |
| Voltage | 115v, 230v |
| Sensor Stud Orientation | None |
| Mounting Stud Type | Fixed |
| Heater Size | 2" |
| Heater Application | Balboa Water Group |
58104 is same heater assembly except has a 4kw heating element
FREE SHIPPING
Product Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Heater
Fit perfectly and is operating correctly.
-
Balboa flow through heater
Easy part to replace,first check old one make sure there is no fuzzyon a sensor that could be touching heater coil and causing a voltage leak to the tube housing.. this is also labeled as a different brand probably the company that's makes it for balboa and does not have the split locking nuts so either use the old ones or hopefully you have a good grip or a pair of big azz channel lock to get it loose next time
